When the scalpel cuts through silence, each precise coagulation and incision embodies respect for life and mastery of technique. However, the pervasive surgical smoke and uncontrolled energy dispersion during electrosurgical procedures can often distract surgeons at critical moments. Utah Medical Products® understands these concerns and offers innovative technological solutions through its comprehensive range of high-quality electrosurgical accessories.
The smoke generated during electrosurgical procedures not only obstructs the surgical field but may also contain hazardous substances. Utah Medical Products® addresses this challenge with its three-stage filtration system specifically designed for Finesse+ and Finesse II+ systems. The system features an efficient activated carbon filter that effectively adsorbs odorous gases, complemented by two-stage high-efficiency particulate filters capable of capturing 99.999% of particles and aerosols as small as 0.1 microns.
For compatibility with other brands of smoke evacuators, Utah Medical Products® provides intelligent conversion kits featuring the same three-stage filtration technology (activated carbon plus two-stage HEPA filters). These kits ensure rapid and thorough smoke removal while maintaining high airflow rates through their large-area filter design. The EUS-961 system offers seamless integration with multiple mainstream smoke evacuators including Aspen/ConMed AirSafe AspenVac, BEI Medical 395-700, and Valleylab ValleyVac among others.
The disposable electrosurgical pencils provide exceptional handling and control, compatible with loop, ball electrodes, and electrosurgical blades. Each sterile-packed unit comes with a 10-foot (approximately 3.05-meter) cable and is available in both non-switch (foot pedal controlled) and handswitch models to accommodate different surgical preferences.
The Contact Quality Monitoring (CQM) dispersive electrodes provide real-time feedback on skin contact when used with compatible electrosurgical systems like Finesse+ and Finesse II+. Their split design helps prevent accidental thermal injuries caused by poor contact, while the skin-friendly hydrogel surface ensures optimal adhesion and conductivity. These electrodes are certified to meet IEC 60601-2-2 electrosurgical safety standards.
The dual-pedal footswitch designed specifically for Finesse+ and Finesse II+ systems allows intuitive switching between cutting and coagulation modes while optionally activating the smoke evacuation system. Its 10-foot cable provides ample operating space.
| Product Category | Model | Description | Unit |
|---|---|---|---|
| Disposable Electrosurgical Pencil | ESU-301 | Non-switch pencil (foot pedal controlled) | 20/box |
| Disposable Electrosurgical Pencil | ESU-305 | Handswitch pencil | 10/box |
| Dispersive Electrode | ESU-420 | Split CQM dispersive electrode with 10' cable | 10/box |
| Filtration System | ESU-501 | Finesse® filter set | 5/box |
| Footswitch | ESU-170 | Four-pin footswitch (for current Finesse+ and Finesse II+ systems) | 1/unit |
| Smoke Evacuation Conversion Kit | ESU-961 | Smoke filtration conversion system (Stackhouse®) | 1/unit |
All listed products carry CE certification, ensuring quality and reliability. Utah Medical Products® continues to advance medical device performance and safety through technological innovation, providing healthcare professionals worldwide with trusted solutions.
